polyurethane rubber
英 [ˌpɒliˈjʊərəθeɪn ˈrʌbə(r)]
美 [ˌpɑːliˈjʊrəθeɪn ˈrʌbər]
网络 聚氨酯橡胶; 聚氨脂橡胶; 聚氨酯胶
双语例句
- The ball is a hollow aluminum sphere covered with a thick layer of polyurethane rubber.
这个球是空心球体，表面有一层厚厚的聚氨酯橡胶。 - Species are natural rubber, styrene-butadiene rubber, nitrile rubber, chloroprene rubber, isobutyl rubber, polyurethane rubber, fluorine rubber and so on.
品种有天然橡胶、丁苯橡胶、丁腈橡胶、氯丁橡胶、异丁橡胶、聚氨酯橡胶、氟橡胶等。 - Influence of modified epoxy adhesive on adhesion of stainless steel and casting polyurethane rubber
改性环氧底胶对不锈钢与聚氨酯橡胶粘接的影响 - It is mainly one-component polyurethane, silicon rubber and polysulfide rubber.
它主要包括单组分的聚氨酯、硅橡胶和聚硫橡胶等。 - Machine from the reducer, chain drive, using polyurethane rubber roller, long life;
该机由减速机、链轮传动，采用聚氨酯胶辊，使用寿命长； - The manufacture process of aluminum foil was analyzed, explained the performance and the merit of the polyurethane rubber punching die.
分析了铝钎焊料的加工工艺，说明了聚氨酯橡胶模的性能和优点。 - Activated terminated polyurethane rubber ( PU) is used to reduce shrinkage of unsaturated polyester resin ( UP). Before UP curing, PU and UP can dissolve each other very well.
通过在不饱和聚酯树脂中加入活性端基聚氨酯橡胶来降低树脂的体积收缩。 - Abrasion test of polyurethane rubber in piston and valve of petroleum drill pump
石油钻井泵聚氨酯橡胶活塞和泵阀的磨耗 - Synthesis of high hardness polyurethane plastics rubber
高硬度聚氨酯塑胶的合成 - Study on Design of Polyurethane Rubber Blanking Die
聚氨酯橡胶冲裁模具的设计探讨 - Application of Polyurethane Synthesis Rubber in Higher Temperature
聚氨酯人造橡胶的高温应用 - Preparation and properties of rectorite/ thermoplastic polyurethane rubber nanocomposites
累托石/热塑性聚氨酯弹性体纳米复合材料的制备与性能 - Application of General Polyurethane Rubber Dies to Blanking the Very Thin Parts
聚氨酯橡胶通用模在冲裁微薄零件中的应用 - Influence of Polyurethane Rubber Sieving Plate to Basis Dynamics of Flip-Flow Screen
橡胶筛面对弛张筛基础动力学的影响 - On the base of understanding the blanking process of polyurethane rubber and its processing properties, the design gist of the blanking die of polyurethane rubber must be mastered.
在了解聚氨酯橡胶冲裁的过程和聚氨酯橡胶冲裁的工艺性的基础上，必须掌握聚氨酯橡胶冲裁模具主要零件的设计要领。 - Synthesis of moisture-curable polyurethane liquid rubber
一液型聚氨酯液体橡胶的研制 - Test on the Binding of Pouring Polyurethane Rubber with Steel Plate
浇注型聚氨酯橡胶与钢板粘合工艺的试验研究 - Synthesis of Two-Component Casting Polyurethane Rubber Curing at Ambient Temperature
室温固化双组分聚氨酯浇注胶的合成 - The structure of rubber bulging die for the aluminium alloy teapot is introduced. The advantage of the manufacturing punch with the polyurethane rubber is expounded.
介绍了铝合金茶壶橡胶胀形模具结构，阐明了聚氨酯橡胶制作凸模的优点。 - The effects of four different types of fillers on the thermal, mechanical and water resistant properties of room temperature cured polyester polyol-based casting polyurethane rubber were explored.
以4种填料合成了室温固化的聚酯型聚氨酯浇注胶，研究了填料的种类、用量以及复配形式对聚氨酯耐热形变性能、机械性能、耐水性能和热降解性能的影响。 - Investigation and Application of Pouring Polyester Type Polyurethane Rubber
聚酯型聚氨酯浇注橡胶的研究及应用 - The Application of Polyurethane in Rubber-Plastic Composite Type Seal
聚氨酯材料在橡塑组合密封中的应用 - Quasi_Hydrostatic Extrusion and New Application Method of Polyurethane Rubber
准静液挤压和聚氨酯橡胶应用新方法 - In this paper, the modified epoxy adhesive applying in adhesion of stainless steel and casting polyurethane rubber is developed.
研制出改性环氧胶粘剂作为底胶用于不锈钢与浇注型聚氨酯橡胶的粘接。 - Especially reinforced polyurethane plastic foam, combing features of polyurethane plastic foam and polyurethane rubber, can resist impact and shock, has important application value to industrial and national defense.
特别是性能介于聚氨酯泡沫塑料同聚氨酯橡胶之间的增强型硬质聚氨酯泡沫塑料，具有耐冲击和防震等优良性能，在工业和国防上有特殊的应用，相关材料工艺性能的研究具有重要的应用价值。 - The MDI-based polyurethane rubber track has little odor and better properties than those of TDI-based, it meet the environment protective require.
研究表明该MDI型塑胶跑道与传统的TDI聚氨酯塑胶跑道相比，气味小，符合环保要求，而且综合性能优越。 - The elastic grinding wheel, made from such basic materials as polyurethane synthetic rubber and ethylene-fluoride and coated with a layer of abrasive can be applied to the processing centres and the automatic machine tools to do fine processing on free curved surface.
采用聚氨酯合成橡胶及氟化乙烯发泡材料作成基材，再外加一层研磨材料作成的弹性砂轮，在加工中心及自动机床上对自由面进行光整加工。 - Polyurethane elastomer ( PUE), also known as polyurethane rubber, is one species of high molecular synthetic material whose performance is between plastic and rubber, which contains many carbamate groups in the main chain.
聚氨酯弹性体（PUE）又称聚氨酯橡胶，是一种主链上含有较多氨基甲酸酯基团，性能介于塑料和橡胶之间的高分子合成材料。 - Driven by the electro-magnetic chuck and using the polyurethane rubber sleeve as the clamping element, the fixture has compact structure, is easy to control, clamps workpiece reliably and is less likely to scratch the surface of the workpiece.
该夹具采用电磁吸盘作为动力源，并采用聚氨酯橡胶套作为夹紧元件，具有结构紧凑、容易控制、夹紧可靠且不易划伤工件外表面等优点。 - For numerical simulation of sheet blanking, the polyurethane rubber micro-blanking mould analytical model was established in ABAQUS/ Explicit.
运用有限元软件ABAQUS/Explicit建立聚氨酯橡胶微冲裁模分析模型，对板料冲裁过程进行数仇模拟。